Weekly Magic #18
written by Beezer Vablatsky
Weekly Magic bringing you the Magic! Owl Beezer Granger or Aloha, if you want to join. Sorry for the delay on publishing. Enjoy! :)
Last Updated
05/31/21
Chapters
15
Reads
483
Be a Witch/Wizard at Home! (DIY)
Chapter 6
Remembrall
Materials:
- Plastic Snap Ball or solid ornament
- 2, 3 metres aprox. red tulle or sheer ribbon
- 30 cm aprox. gold ribbon
- Scissors
- Glue
Instructions:
1. Use a grinder to cut the ornament hanger off the Snap Ball style, so it's a plain ball.
2. Bunch up the tulle into the ball; shove it in the hole if you're using a solid ball, fit it into half if using the snap ball.
3. Close the ball up, being careful not to catch any of the ribbon in the seam, or your midline ribbon will be lumpy!
4. Glue gold ribbon to cover the seam, or around the middle of the solid ball.
5. Replace the top hanger if using a solid ball, set aside to let the glue dry, and your Harry Potter Remembrall is done
- Marina Fay
Materials:
- Plastic Snap Ball or solid ornament
- 2, 3 metres aprox. red tulle or sheer ribbon
- 30 cm aprox. gold ribbon
- Scissors
- Glue
Instructions:
1. Use a grinder to cut the ornament hanger off the Snap Ball style, so it's a plain ball.
2. Bunch up the tulle into the ball; shove it in the hole if you're using a solid ball, fit it into half if using the snap ball.
3. Close the ball up, being careful not to catch any of the ribbon in the seam, or your midline ribbon will be lumpy!
4. Glue gold ribbon to cover the seam, or around the middle of the solid ball.
5. Replace the top hanger if using a solid ball, set aside to let the glue dry, and your Harry Potter Remembrall is done
- Marina Fay
